THE EXCLUSIVE IMPORTER AND DISTRIBUTOR OF
MILLER CURBER BRAND OVER 3 CONTINENTS

To get a quotation

Miller Curbilder (c) 550 / 650 / 850

Characteristic of the extruder machines
Technical characteristic of the extruder machine are detailed in the chart below.
For over fifty years the Miller MC Series Curbilders have offered unequaled performance and versatility for the placement of freestanding curb. These simple and efficient self-propelled machines operate on the extrusion principle and provide the most economical means available of constructing small to mid-sized continuous curb from either concrete or asphalt. This quick and efficient process drastically reduces the high labor costs associated with hand formed and poured curb and produces high quality, extremely dense curb at a rate of up to 15 fpm (up to 30 fpm for MC900). Miller’s exclusive interchangeable extrusion auger assemblies give each Curbilder the capacity to extrude more shapes and sizes than any machine in its class, from 3-1/2” to 18” high curb. A wide variety of options allow these machines to meet the toughest specification work.

Executable works with these extruder machines
Curbs, gutters, shoving and mixed works (curbs and gutters) to 60 cm high. It "extrusion by screw" system enable to pour concrete or asphalt curbs on binder or asphalted finished road. Able to pour right or left side.

Miller Curbilder (c) 900

Characteristic of this extruder machines
Thanks to it reduce size, even if it is longer than other models, this model could fast and easy be moved, decreasing move cost. It takes small part of the road and don't block the car flow and allows to work in circulation. It pour very small radius curbs and curves. This model enable to work faster and curb higher profile.

Executable works with this extruder
Curbs, gutters, shoving and mixed works (curbs and gutters) to 60 cm high. It "extrusion by screw" system enable to pour concrete or asphalt curbs on binder or asphalted finished road. Able to pour right or left side.

Miller Curbilder (c) extruder machines advantages

* Every model will extrude concrete or asphalt
* Four interchangeable extrusion assemblies with auger diameters from 5” to 10”
* Extrude from right or left side of the machine
* Place curb within 1” of an obstacle
* Extrude steel rod through the curb center (optional hollow auger assembly)
* Extrude over pins (optional form)
* Two-piece 5” and 6” cast auger allowing four separate wear surfaces for extended life
* Easy access and removal of all extrusion components for maintenance and quick clean-up
* Nearly 2,000 curb choices with custom shapes available

Molds to fit to all standardize curbs in most of European countries

We provide all standardize curbs for sidewalks, circles, ...

Molds to fit to most of the curbs, gutters and combined (curbs and gutter) works

We also provide all famous molds to curb no-standard sidewalks, gutters, shoving,circles, lanes separator, cycle lanes, ....

The opportunity to create custom made molds

If nedded mold doesn't exist in our catalogue, we are able, following your instruction, to draw and fabricate it.

To get a quotation

A complete range of machines to answer all needs regarding landscape curbs

Two different machine models are available to meet small curb requirements, from decorative landscape borders to small tack-down commercial applications. Either the MC250 extrusion machine, or the MC350 reciprocating plunger machine, will produce high-quality, free-standing concrete curb.
Both machines feature:
• Console-mounted emergency stop
• Hour-service meter
• Level indicator
• Lifting bail
• Multi-position steering handle

MC 250 model

• Superior speed, curb-density, and strength due to extrusion process.
• Ideally suits both decorative borders and small commercial applications
• Continuous speeds to 10 fpm.

MC 350 model

• Reversible curb forms for left or right curb placement
• Simple disassembly for cleanup
• Reduced maintenance costs due to reciprocating plunger design.